ES:ME
Our standard Capabilities Projects How we work Team Get in touch
Legal

Terms & Conditions, UAE

Version: November 2026 · ESME Entertainment Services LLC

For a PDF copy of these terms, email info@es-me.net.

1. Interpretation

In these terms:

1.1 "ESME" refers to ESME Entertainment Services LLC, licence no. 635315, Dubai, United Arab Emirates;

1.2 "Client" refers to the legal entity accepting ESME's quotation;

1.3 "Equipment" means all items supplied by ESME;

1.4 "Dry Hire" refers to hire of Equipment without personnel;

1.5 "Hire Charge" refers to ESME's charges for Equipment/Services;

1.6 "Services" means installation, operation and removal of Equipment and other described services;

1.7 "writing" includes electronic mail.

2. Provision of Equipment and Services

2.1 ESME shall supply and the Client shall accept Equipment and Services at the designated location(s) per the Agreement, which incorporates these terms exclusively unless varied in writing by ESME.

2.2 Client confirms Equipment suitability and acknowledges no reliance on prior representations not stated herein. Equipment is provided on hire only. Ownership remains with ESME.

2.3 ESME shall supply Equipment in good working order and perform Services with reasonable care and skill.

3. Order Acceptance and Cancellation

3.1 Orders are not binding unless confirmed in writing by ESME. A deposit may be required.

3.2 ESME reserves the right to amend Services for legal compliance.

3.3 Cancellations require ESME's written consent and full indemnity by the Client for associated losses.

3.4 Cancellation charges:

3.4.1 50% after confirmed LPO

3.4.2 75% within 14 days of setup

3.4.3 100% within 7 days of setup

Reduction of scope within 14 days of setup may result in ESME claiming 100% of the quoted value.

4. Hire Charges

4.1 Charges are per Agreement. Additional Equipment/Services are extra. Delays, losses, or damages extend the charge period (max 12 weeks if lost).

4.2 Unless ESME's quotation states a different payment schedule, the Client shall pay the Hire Charge, plus any applicable taxes, in cleared funds as follows:

4.2.1 Established clients (as determined by ESME): (a) 50% upon confirmation of the order; (b) 40% no later than 7 days before mobilisation; and (c) 10% within 30 days of completion.

4.2.2 New clients: 100% upon confirmation of the order and, in any event, before mobilisation.

4.2.3 Crew-only Services: 100% in advance, whatever the Client's status.

4.2.4 Dry Hire with a Hire Charge (excluding VAT) up to and including AED 15,000: 100% in advance, before any Equipment is released. Dry Hire above this amount follows Clause 4.2.1 or 4.2.2, according to the Client's status.

4.2.5 “Completion” means the last day of the Services or the return of all Equipment to ESME, whichever is later. ESME is not obliged to mobilise, deliver or release any Equipment until each payment due by then has been received. ESME may change a Client's status, or require payment in advance, at any time.

4.2.6 Each payment shall be made on time and in full, without deduction, set-off or counterclaim. All bank, intermediary and transfer charges are for the Client's account. Any agreed discount may be forfeited if payment is late.

4.2.7 The Client shall notify ESME in writing of any dispute about an invoice, with reasons, within 7 days of the invoice date; otherwise the invoice is deemed accepted. Any undisputed part of an invoice shall be paid when due.

4.3 Late payment.

4.3.1 If any payment is not received in cleared funds by its due date under the payment schedule and work has already started, ESME reserves the right to stop work, including work on site, without prior notice until the overdue amounts have cleared. ESME will leave any installation in a safe condition.

4.3.2 Any delay caused by such a stoppage, and any additional costs it causes (including standby, remobilisation, transport and rescheduling costs), are the responsibility of the Client and shall be borne by the Client. ESME shall not be liable for any resulting delay, cancellation, loss or damage, and the Hire Charge remains payable in full.

4.3.3 Except in Dry Hire, ESME's Equipment may not be moved, operated or interfered with by anyone other than ESME's employees or contractors, including during any stoppage.

4.3.4 ESME may also suspend or cancel any other Services or Equipment for the Client, under this or any other agreement between the parties, and may apply any payment received towards any amount the Client owes ESME.

4.3.5 Overdue sums shall accrue interest at 1% per month (12% annually), subject to UAE law.

4.4 ESME may increase charges for unforeseen changes. If not accepted, the Client may cancel with indemnity.

4.5 Acceleration of Payment.

4.5.1 If the Client fails to make any payment when due under this Agreement, ESME may immediately declare all outstanding amounts due and payable in full.

4.5.2 If the Client breaches any other material term of this Agreement and fails to remedy such breach within seven (7) days of written notice from ESME, ESME may declare all outstanding amounts immediately due and payable.

4.5.3 The exercise of rights under this Clause 4.5 shall be without prejudice to any other rights or remedies available to ESME under this Agreement or UAE law, including without limitation the termination rights set out in Clause 10.

4.6 ESME may set off any amounts owed by ESME to the Client against any amounts due from the Client to ESME under this Agreement or any other agreement between the parties, whether or not such amounts are due.

4.7 The Client shall be liable for all additional costs arising from any delay, interruption, or extension to the agreed schedule caused by the Client, its contractors, the venue, or any third party not under the control of ESME. Such additional costs may include extended labour hours, additional Equipment hire days, standby or waiting time, rebooking, and rescheduling charges.

4.8 Crew are charged at the day rates stated in the quotation. Time worked beyond the standard working day stated in the quotation is charged as overtime at the rates stated in the quotation.

4.9 All amounts are payable in the currency stated in the quotation. If the Client pays in another currency, any exchange difference and conversion costs are for the Client's account.

5. Risk and Insurance

5.1 Risk transfers at delivery and returns to ESME upon return.

5.2 Client shall insure Equipment at full replacement value, naming ESME as loss payee.

5.3 Security cheque is required for dry hire.

5.4 ESME may make claims on Client’s insurance.

5.5 Loss or damage must be promptly reported.

5.6 Failure to insure permits ESME to charge 15% of Equipment value as insurance fee.

5.7 ESME is not liable for Client or third-party property.

6. Health and Safety

6.1 Client shall ensure safe working conditions for ESME and protect Equipment.

6.2 Client-provided structures must be certified and suitable.

7. Client Obligations

Client shall:

7.1 Grant access to ESME;

7.2 Provide power, files, and facilities as needed;

7.3 Ensure timely and competent provision of supporting services;

7.4 Secure licences and approvals;

7.5 Handle customs and logistics for self-arranged transit;

7.6 Not operate Equipment (unless Dry Hire) or tamper with it;

7.7 Report breakdowns and refrain from unauthorised repairs;

7.8 Not sublet, sell, or pledge Equipment;

7.9 Notify ESME of location changes;

7.10 Indemnify ESME for losses due to Client negligence or breach.

8. Additional Obligations (Dry Hire)

Client shall:

8.1 Inspect Equipment pre-use;

8.2 Use Equipment safely and properly;

8.3 Avoid modifications and preserve serial labels.

9. Liability Limitations

9.1 ESME’s liability is limited:

  • All implied warranties excluded to the extent permitted by UAE law;
  • Liability for each event or series of connected events is capped at the total Hire Charges, except that liability for loss of or damage to physical property caused by ESME's negligence is capped at AED 5,000,000;
  • No liability for indirect, consequential loss or business interruption;
  • Claims must be notified within 90 days;
  • Sold Equipment is as-is unless otherwise agreed;
  • Death or personal injury from negligence is not excluded.

9.2 Higher limits may be negotiated for additional charges.

9.3 ESME shall not be liable for any delay or failure to perform its obligations due to Force Majeure. “Force Majeure” refers to events beyond ESME’s reasonable control, including:

(a) natural disasters such as fire, flood, or earthquakes;

(b) severe or unsafe weather conditions impacting installation or operation;

(c) electrical or power failures;

(d) war, invasion, armed conflict, or civil unrest;

(e) acts of terrorism or sabotage;

(f) industrial action, strikes, or lockouts;

(g) governmental restrictions, sanctions, embargoes, or regulatory orders;

(h) pandemics, epidemics, or public health emergencies;

(i) supplier, subcontractor, or transportation failures caused by any of the above events.

If Equipment has already been delivered and installed at the Venue, the Client remains responsible for paying the Hire Charge in full. If Equipment has not yet been delivered, Clause 3.3 shall apply.

9.4 Both parties acknowledge that the political and security conditions in the region at the date of the Agreement are known to them and have been taken into account in the Agreement. Those conditions, and their continuation, shall not by themselves constitute Force Majeure or entitle either party to cancel, suspend or delay performance or payment. Force Majeure may apply only where a new or materially escalated event occurs after the date of the Agreement and directly prevents performance, such as an order of a competent authority cancelling or prohibiting the event, the closure of the Venue, airspace or borders, or a declared state of emergency. If the Client chooses to postpone or cancel because of regional conditions, Clauses 3.3 and 3.4 apply.

10. Termination

10.1 ESME may terminate with immediate effect if Client becomes insolvent, bankrupt, unable to pay debts, subject to enforcement, loses legal licence, or equivalent under UAE law.

10.2 Termination may also occur if payment defaults, breach of terms continues after notice, Force Majeure prevents performance, or insurance becomes unavailable.

10.3 Upon termination, Equipment must be returned or will be repossessed at Client's cost. All due sums become immediately payable.

10.4 Upon termination under this Clause 10:

10.4.1 All Equipment must be immediately returned to ESME in the same condition as delivered (fair wear and tear excepted), or ESME may repossess such Equipment at the Client's cost and risk;

10.4.2 All amounts due under this Agreement shall become immediately payable in accordance with Clause 4.5.1; and

10.4.3 The Client shall indemnify ESME for all costs, losses, and expenses incurred in connection with such termination and repossession.

11. Confidentiality

Each party shall maintain confidentiality over all proprietary information disclosed under this Agreement.

12. Anti-Bribery and Compliance

12.1 Each party shall comply with all applicable anti-bribery, anti-corruption, and anti-money laundering laws of the United Arab Emirates, including Federal Decree-Law No. 20 of 2016 and any amendments.

12.2 Neither party shall, directly or indirectly, offer, give, request, or accept any unlawful payment, advantage, or benefit in connection with this Agreement.

12.3 Each party confirms it maintains adequate internal procedures designed to prevent bribery, corruption, and money laundering.

12.4 Any breach of this clause constitutes a material breach of the Agreement.

13. VAT and Tax Compliance

13.1 All charges under this Agreement are exclusive of Value Added Tax (VAT) unless expressly stated otherwise.

13.2 The Client shall pay VAT at the applicable rate under UAE Federal Tax Authority (FTA) regulations.

13.3 ESME shall issue tax-compliant VAT invoices as required by UAE law.

13.4 Each party is responsible for its own tax obligations and shall provide tax registration details upon reasonable request.

13.5 If any applicable law requires the Client to withhold or deduct tax from any payment to ESME, including where Services are performed or paid for outside the country in which ESME is registered, the Client shall increase the payment so that ESME receives the full amount it would have received without the deduction, and shall promptly give ESME the official tax payment certificate.

14. Governing Law, Jurisdiction, and Language

14.1 This Agreement shall be governed by and construed in accordance with the laws of the United Arab Emirates.

14.2 Any disputes arising out of or in connection with this Agreement shall be subject to the exclusive jurisdiction of the courts of the Emirate of Dubai, United Arab Emirates.

14.3 This Agreement is drafted in English. If an Arabic translation is required for proceedings before Dubai Courts, the English version shall form the basis for any translation and shall prevail to the fullest extent permitted by law.

15. General

15.1 If the Client is more than one person, they are jointly and severally liable.

15.2 ESME may subcontract any of its obligations to a competent third party. Otherwise, neither party may assign or transfer its rights or obligations without the other's written consent.

15.3 Any typographical or clerical error in documents issued by ESME may be corrected without liability.

15.4 Notices shall be in writing and delivered by hand, courier or electronic mail to the address stated in the Agreement or later notified for that purpose.

15.5 A delay in enforcing, or a waiver of, any provision does not waive any later breach.

15.6 If any provision is held invalid or unenforceable, the remaining provisions are not affected.

15.7 Headings are for convenience only and do not affect interpretation.

16. Publicity and Data Protection

16.1 ESME may photograph and film its Equipment and Services at the Venue and use the images, together with the name of the event and of the Client, on its website, social media and other marketing material, unless the Client objects in writing before the event. ESME will not publish confidential information, or images the Client has told ESME in writing are restricted.

16.2 Each party shall handle personal data received under this Agreement in line with applicable data protection law. ESME's privacy policy is published on its website, www.es-me.net.

ES:ME
© ES:ME. All rights reserved. ES:ME® is a registered trademark of ESME Entertainment Services LLC in the United Arab Emirates. · Privacy policy Engineering · Planning · Delivery